ESU - Electronic Solutions Ulm

ESU 59810 LokPilot 5 Micro Multi-protocol (DCC/MM/SX/M4) Decoder - NEM652 8-pin Wired Plug     The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards...

ESU 59814 LokPilot 5 Micro Multi-protocol (DCC/MM/SX/M4) Decoder - NEM658 PluX16 Integral Connector     The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed...

ESU 59816 LokPilot 5 Micro Multi-protocol (DCC/MM/SX/M4) Decoder - NEM651 6-pin Wired Plug     The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit...

ESU 59817 LokPilot 5 Micro Multi-protocol (DCC/MM/SX/M4) Decoder - NEM651 6-pin Integral Connector     The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed...

ESU 59818 LokPilot 5 Micro Multi-protocol (DCC/MM/SX/M4) Decoder - NEM662 Next18 Integral Connector     The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed...

ESU 59820 LokPilot 5 Micro NMRA DCC Decoder - NEM652 8-pin Wired Plug     The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that it can...

ESU 59824 LokPilot 5 Micro NMRA DCC Decoder - NEM658 PluX16 Integral Connector     The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so...

ESU 59826 LokPilot 5 Micro NMRA DCC Decoder - NEM651 6-pin Wired Plug     The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that...

ESU 59827 LokPilot 5 Micro NMRA DCC Decoder - NEM651 6-pin Integral Connector     The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so...

ESU 59828 LokPilot 5 Micro NMRA DCC Decoder - NEM662 Next18 Integral Connector     The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so...

ESU 59837 LokPilot 5 Micro Multi-protocol (DCC/MM/SX/M4) Decoder - NEM651 6-pin Integral Connector (90 Degree)     The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer...

ESU 59857 LokPilot 5 Micro NMRA DCC Decoder - NEM651 6-pin Integral Connector (90 Degree)     The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm),...

ESU 59925 LokPilot 5 Nano NMRA DCC Decoder - ESU E24 Integral Connector The LokPilot 5 Nano DCC is the “twin” of the LokSound 5 Nano DCC. At 19.6 mm x 8.5 mm and a thickness of only 3.2 mm, it is exactly the same size as the corresponding...

ESU 59941 LokPilot 5 Micro Direct NMRA DCC Decoder - N Drop-in Board for Kato Wide Body Type The LokPilot 5 micro DCC Direct Kato USA Widebody is the “twin” of the LokSound 5 micro DCC Direct Kato USA Widebody. With its dimensions of 47.5mm x...

Model Railroad Technologies Accutrack II Train Speedometer   Note: This is a portable, stand-alone speed detection device. It works with DC or DCC layouts. It works with any DCC system since they are not connected in any way.   Introducing the...

SBS4DCC - 10pc ESU 53900 LokTester - Zimo MXTAPS Decoder Tester Test Clip Set     The set contains 10 Grabber type test clips molded from glass reinforced plastic in 10 colors.   Colors include Red, Black, Orange, Gray, White, Yellow,...

SBS4DCC - 1pc Black ESU 53900 LokTester - Zimo MXTAPS Decoder Tester Test Clip Set       This is 1pc extra clip to make a full set for decoders with two black wires.     The set contains 10 Grabber type test clips molded...

SBS4DCC - 1pc Brown ESU 53900 LokTester - Zimo MXTAPS Decoder Tester Test Clip Set       This is 1pc extra clip to make a full set for decoders with two brown wires.     The set contains 10 Grabber type test clips molded...

SBS4DCC - 1pc Red ESU 53900 LokTester - Zimo MXTAPS Decoder Tester Test Clip Set       This is 1pc extra clip to make a full set for decoders with two red wires.     The set contains 10 Grabber type test clips molded from...

SBS4DCC - 1pc Violet ESU 53900 LokTester - Zimo MXTAPS Decoder Tester Test Clip Set       This is 1pc extra clip to make a full set for decoders with two violet wires.     The set contains 10 Grabber type test clips...

SBS4DCC - 8pc ESU 53900 LokTester - Zimo MXTAPS Decoder Tester Test Clip Set     The set contains 8 Grabber type test clips molded from plastic in 8 colors.   Colors include Red, Black, White, Yellow, Blue, Green, Brown and Purple, a...

SBS4DCC - ESU 53900 LokTester Decoder Test Module Add-On Kit for 58721 58731 58741 MX605 MX660     The kit includes:   1x Base 1x Top Weight Box 25x POGO Pins   Weights and wire are required but not included.  I also recommend a...

SBS4DCC - ESU 53900 LokTester Decoder Test Module Add-On Kit for 58821 58921     The kit includes:   1x Base 1x Top Weight Box 17x POGO Pins   Weights and wire are required but not included.  I also recommend a standard DCC...