ESU - Electronic Solutions Ulm
ESU 59721 LokPilot 5 Micro Direct NMRA DCC Decoder - N Drop-in Board for Post-2016 Atlas Gold, InterMountain SD40-2 and Others
- UPC:
- 4044645597217
- MPN:
- 59721
- Condition:
- New
Save More With Volume Discounts…
| Buy 5 - 9 | $32.07 each |
| Buy 10 or above | $31.08 each |
Description
The LokPilot 5 micro DCC Direct has been specially developed for installation in Spur N vehicles of the Atlas and Intermountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can also be used for similar models from other manufacturers at your own discretion.
The LokPilot 5 micro DCC Direct with its dimensions of 66.0mm x 8.2mm is a pure DCC decoder.
Modes
The LokPilot 5 micro DCC Direct is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center.
It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.
The LokPilot 5 micro DCC Direct Decoder detects the Märklin® brake distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An AUTOMATIC ABC commuter train allows automatic commuting between two stations.The LokPilot 5 micro DCC Direct can be used on analog DC webs.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.
Functions
The LokPilot 5 micro DCC Direct has 10 directly soldered LEDs. Two of them are intended for front and rear head lighting, two more are connected to the aux3 and AUX4 outputs to switch e.g. number boards. A further 6 LEDs on the bottom are intended for ditch lights, but can also be used for other lighting purposes on request. All important lighting functions are available. The brightness of each output can be set separately.
Motor
The motor control of the LokPilot 5 micro DCC Direct has a variable PWM clock frequency from 10kHz to 50kHz, which ensures super-quiet operation, especially for bell anchor motors – the hitherto typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the decoder to be automatically measured against the motor. The LokPilot 5 micro DCC Direct Decoder delivers up to 0.9A motor power.
Protection
Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible
Decoder Specifications:
-
Size: 66.0 mm x 8.2 mm x 3.2 mm (2.60 in x 0.33 in x 0.13 in)
-
Interface: N Scale Drop-In
-
Motor Rating: 0.9 A Nominal
-
BEMF: Motor control with 50 kHz clock frequency
-
Functions: 10 amplified outputs for special functions
- Protocol: DCC with RailComPlus®
-
Additional Features:
- Updatable with ESU-LokProgrammer
- Two-stage heavy load simulation
- 3 new, individually adjustable brake controllers
- Connection interface for RC servos and SUSI modules
- Optional PowerPack storage capacitor connections
- Operation under DCC with RailComPlus®, M4, Motorola® and Selectrix®
- 32 functions switchable (depending on the control panel)
- Motor control with 50 kHz clock frequency
- RC servos and Susi modules can be controlled
- 3 new, individually adjustable brake controllers
- Two-stage heavy load simulation
- Updateable with ESU-LokProgrammer
- Universal motor decoder for the gauge N and H0
- Motor current 0.9A
- PowerPack storage capacitor optionally connectable
- Dimensions: 66.0 mm x 8.2 mm, height depends on interface
- N Scale Drop-In for Atlas and InterMountain Post 2016 frames
* Replaces ESU 54650 LokPilot V4.0 Direct Micro OEM NMRA DCC Decoder Drop-In for Post-2016 IRC Locos
Additional Resources
MANUFACTURERS WEBSITE: |
|
SOUND CONFIGURATION & SOUND FILE RESOURCES: |
|
FIRMWARE & SOFTWARE RESOURCES: |
|
PRODUCT MANUALS & TECHNICAL DOCUMENT RESOURCES: |
|
MANUFACTURERS WARRANTY & REPAIRS: |
|
ADDITIONAL INFORMATION - DCC TIPS: |
|
ADDITIONAL INFORMATION (1): |
|
ADDITIONAL INFORMATION (2): |
Additional Information
PRODUCT CLASS : |
N Scale - Board Replacement |
DECODER TYPE: |
Motor + Function |
DECODER INTERFACE (PRIMARY): |
Drop-In - Solder Pads |
DECODER INTERFACE (SECONDARY): |
NA |
SIZE-INCH (L x W x H): |
2.6 x 0.32 x 0.13 in |
SIZE-METRIC (L x W x H): |
66 x 8.2 x 3.2 mm |
MOTOR CURRENT (CONTINUOUS): |
0.9A |
MOTOR CURRENT (PEAK): |
0.9A |
FUNCTION CURRENT (MAX): |
180mA each |
NORMAL OUTPUT FUNCTIONS: |
10* |
LOGIC-LEVEL FUNCTIONS: |
0 |
SERVO OUTPUT FUNCTIONS: |
0 |
FUNCTION INPUTS: |
0 |
KEEP-ALIVE INTERFACE: |
NA |
KA INPUT VOLTAGE (MAX): |
NA |
KA TOTAL CAPACITANCE: |
NA |
CV PROGRAMMING: |
Service Mode + P.O.M. |
FIRMWARE UPDATE: |
Yes - LokProgrammer required |
PROTOCOL: |
NMRA DCC |
BI-DIRECTIONAL COMMUNICATION: |
RailCom Plus |
ADDITIONAL FEATURES: |
NA |
NOTES (1): |
* - Integrated LEDs on each function |
NOTES (2): |
NA |
Related Products
ESU 58721 LokSound 5 Micro Direct NMRA DCC Sound Decoder - N Drop-in Board for Post-2016 Atlas Gold, InterMountain SD40-2 and Others
ESU - Electronic Solutions Ulm
ESU 59941 LokPilot 5 Micro Direct NMRA DCC Decoder - N Drop-in Board for Kato Wide Body Type
ESU - Electronic Solutions Ulm
ESU 58751 LokSound 5 Micro Direct NMRA DCC Sound Decoder - N Drop-in Board for Pre-2016 Atlas Narrow Hood type
ESU - Electronic Solutions Ulm
ESU 58741 LokSound 5 Micro Direct NMRA DCC Sound Decoder - N Drop-in Board for Kato Narrow Hood type
ESU - Electronic Solutions Ulm
ESU 58941 LokSound 5 Micro Direct NMRA DCC Sound Decoder - N Drop-in Board for Kato Wide Body Type
ESU - Electronic Solutions Ulm
Digitrax DN166I3 Series 6 DCC Decoder - N Drop-in Board for Post-2017 InterMountain SD40-2
Digitrax
ESU 59828 LokPilot 5 Micro NMRA DCC Decoder - NEM662 Next18 Integral Connector
ESU - Electronic Solutions Ulm
ESU 59325 LokPilot 5 L NMRA DCC Decoder - Pin Header with Adapter Board
ESU - Electronic Solutions Ulm
ESU 59824 LokPilot 5 Micro NMRA DCC Decoder - NEM658 PluX16 Integral Connector
ESU - Electronic Solutions Ulm