REQUEST A QUOTE  -  STREAMLINED BACKSHOP INSTALLATIONS AND REPAIRS  -  MORE INFO 
ESU - Electronic Solutions Ulm

ESU 59721 LokPilot 5 Micro Direct NMRA DCC Decoder - N Drop-in Board for Post-2016 Atlas Gold, InterMountain SD40-2 and Others

(No reviews yet) Write a Review
UPC:
4044645597217
MPN:
59721
Condition:
New

Save More With Volume Discounts…

Buy 5 - 9 $32.07 each
Buy 10 or above $31.08 each
  • ESU 59721 LokPilot 5 Micro Direct NMRA DCC Decoder - N Drop-in Board for Post-2016 Atlas Gold, InterMountain SD40-2 and Others
  • ESU 59721 LokPilot 5 Micro Direct NMRA DCC Decoder - N Drop-in Board for Post-2016 Atlas Gold, InterMountain SD40-2 and Others
MSRP: $40.90
Price: $32.72
— You save $8.18

Description

ESU 59721 LokPilot 5 Micro Direct NMRA DCC Decoder - N Drop-in Board for Post-2016 Atlas Gold, InterMountain SD40-2 and Others


The LokPilot 5 micro DCC Direct has been specially developed for installation in Spur N vehicles of the Atlas and Intermountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can also be used for similar models from other manufacturers at your own discretion.

The LokPilot 5 micro DCC Direct with its dimensions of 66.0mm x 8.2mm is a pure DCC decoder.

Modes

The LokPilot 5 micro DCC Direct is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center.

It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.

The LokPilot 5 micro DCC Direct Decoder detects the Märklin® brake distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An AUTOMATIC ABC commuter train allows automatic commuting between two stations.The LokPilot 5 micro DCC Direct can be used on analog DC webs.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.

Functions

The LokPilot 5 micro DCC Direct has 10 directly soldered LEDs. Two of them are intended for front and rear head lighting, two more are connected to the aux3 and AUX4 outputs to switch e.g. number boards. A further 6 LEDs on the bottom are intended for ditch lights, but can also be used for other lighting purposes on request. All important lighting functions are available. The brightness of each output can be set separately.

Motor

The motor control of the LokPilot 5 micro DCC Direct has a variable PWM clock frequency from 10kHz to 50kHz, which ensures super-quiet operation, especially for bell anchor motors – the hitherto typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the decoder to be automatically measured against the motor. The LokPilot 5 micro DCC Direct Decoder delivers up to 0.9A motor power.

Protection

Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible

Decoder Specifications:

  • Size: 66.0 mm x 8.2 mm x 3.2 mm  (2.60 in x 0.33 in x 0.13 in)
  • Interface: N Scale Drop-In 
  • Motor Rating: 0.9 A Nominal
  • BEMF: Motor control with 50 kHz clock frequency
  • Functions:  10 amplified outputs for special functions
  • Protocol: DCC with RailComPlus®
  • Additional Features:
    • Updatable with ESU-LokProgrammer
    • Two-stage heavy load simulation
    • 3 new, individually adjustable brake controllers
    • Connection interface for RC servos and SUSI modules
    • Optional PowerPack storage capacitor connections
Technical specifications
  • Operation under DCC with RailComPlus®, M4, Motorola® and Selectrix®
  • 32 functions switchable (depending on the control panel)
  • Motor control with 50 kHz clock frequency
  • RC servos and Susi modules can be controlled
  • 3 new, individually adjustable brake controllers
  • Two-stage heavy load simulation
  • Updateable with ESU-LokProgrammer
LokPilot 5 Direct Micro
  • Universal motor decoder for the gauge N and H0
  • Motor current 0.9A
  • PowerPack storage capacitor optionally connectable
  • Dimensions: 66.0 mm x 8.2 mm, height depends on interface
Interface
  • N Scale Drop-In for Atlas and InterMountain Post 2016 frames

 

 * Replaces ESU 54650 LokPilot V4.0 Direct Micro OEM NMRA DCC Decoder Drop-In for Post-2016 IRC Locos

 

View AllClose

Additional Resources

View AllClose

Additional Information

PRODUCT CLASS :
N Scale - Board Replacement
DECODER TYPE:
Motor + Function
DECODER INTERFACE (PRIMARY):
Drop-In - Solder Pads
DECODER INTERFACE (SECONDARY):
NA
SIZE-INCH (L x W x H):
2.6 x 0.32 x 0.13 in
SIZE-METRIC (L x W x H):
66 x 8.2 x 3.2 mm
MOTOR CURRENT (CONTINUOUS):
0.9A
MOTOR CURRENT (PEAK):
0.9A
FUNCTION CURRENT (MAX):
180mA each
NORMAL OUTPUT FUNCTIONS:
10*
LOGIC-LEVEL FUNCTIONS:
0
SERVO OUTPUT FUNCTIONS:
0
FUNCTION INPUTS:
0
KEEP-ALIVE INTERFACE:
NA
KA INPUT VOLTAGE (MAX):
NA
KA TOTAL CAPACITANCE:
NA
CV PROGRAMMING:
Service Mode + P.O.M.
FIRMWARE UPDATE:
Yes - LokProgrammer required
PROTOCOL:
NMRA DCC
BI-DIRECTIONAL COMMUNICATION:
RailCom Plus
ADDITIONAL FEATURES:
NA
NOTES (1):
* - Integrated LEDs on each function
NOTES (2):
NA
View AllClose