ESU - Electronic Solutions Ulm
ESU 58721 LokSound 5 Micro Direct NMRA DCC Sound Decoder - N Drop-in Board for Post-2016 Atlas Gold, InterMountain SD40-2 and Others
- UPC:
- 404464558721
- MPN:
- 58721
- Condition:
- New
- Availability:
- Backorders Accepted
Save More With Volume Discounts…
Buy 5 - 9 | $96.78 each |
Buy 10 or above | $93.81 each |
Description
The LokSound 5 micro DCC Direct has been specially developed for installation in Spur N vehicles of the Atlas and Intermountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can also be used for similar models from other manufacturers at your own discretion.
The LokSound 5 micro DCC Direct with its dimensions of 66.0mm x 8.2mm is a pure DCC decoder and comes without a loudspeaker.
Modes
The LokSound 5 micro DCC Direct is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center.
It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.
The LokSound 5 micro DCC Direct Decoder detects the Märklin® brake distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An AUTOMATIC ABC commuter train allows automatic commuting between two stations.The LokSound 5 micro DCC Direct can be used on analog DC webs.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.
Sound
The LokSound 5 micro DCC Direct Decoder can play up to 12 channels simultaneously. Each channel can be resolved with up to 16 bits / 31250 kHz and offers hi-fi quality on your system. There is virtually no difference to the original audible anymore. A Class-D audio output stage with up to 3W output power controls the speakers, which have between 4 ohms and 32 ohms impedance. A 128 Mbit sound memory provides enough capacity.All individual noises can be adjusted individually in the volume. The super-flexible sound engine without a rigid schedule allows the exemplary simulation of all conceivable rail tracks.
Functions
The LokSound 5 micro DCC Direct has 10 directly soldered LEDs. Two of them are intended for front and rear head lighting, two more are connected to the aux3 and AUX4 outputs to switch e.g. number boards. A further 6 LEDs on the bottom are intended for ditch lights, but can also be used for other lighting purposes on request. All important lighting functions are available. The brightness of each output can be set separately.
Motor
The motor control of the LokSound 5 micro DCC Direct has a variable PWM clock frequency from 10kHz to 50kHz, which ensures super-quiet operation, especially for bell anchor motors – the hitherto typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the decoder to be automatically measured against the motor. The LokSound 5 micro DCC Direct Decoder delivers up to 0.9A motor power.
Protection
Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible
Decoder Specifications:
-
Size: 66.0 mm x 8.2 mm x 3.2 mm (2.60 in x 0.33 in x 0.13 in)
-
Interface: N Scale Drop-In
-
Motor Rating: 0.9 A Nominal
-
BEMF: Motor control with 50 kHz clock frequency
-
Functions: 10 amplified outputs for special functions
-
Sound:
- 32-bit processor
- Digital class "D" amplifier with up to 13 W power
- 12 sound channels can be played simultaneously
- Each channel in 16-bit resolution and 31250 kHz sample rate
-
Nominal Speaker Impedance: 4 - 32 Ohm
-
Protocol: DCC with RailComPlus®
-
Additional Features:
- Updatable with ESU-LokProgrammer
- Two-stage heavy load simulation
- 3 new, individually adjustable brake controllers
- Connection interface for RC servos and SUSI modules
- Optional PowerPack storage capacitor connections
- Speaker NOT INCLUDED
- Operation under DCC with RailComPlus®, M4, Motorola® and Selectrix®
- 32 functions switchable (depending on the control panel)
- 32-bit processor
- Digital class "D" amplifier with up to 3 W power (LokSound 5 XL: 13 W)
- 10 sound channels can be played simultaneously
- Each channel in 16-bit resolution and 31250 kHz sample rate
- Noise memory with 128 Mbit capacity
- Motor control with 50 kHz clock frequency
- RC servos and Susi modules can be controlled
- 3 new, individually adjustable brake controllers
- Two-stage heavy load simulation
- Updateable with ESU-LokProgrammer
- Universal sound decoder for the gauge N and H0
- Motor current 0.9A
- 10 amplified function outputs for special functions
- 12 sound channels can be played simultaneously
- Ex works with 11x15 mm "sugar cube" loudspeakers with customizable sound capsule set
- PowerPack storage capacitor optionally connectable
- Dimensions: 66.0 mm x 8.2 mm, height depends on interface
- N Scale Drop-In for Atlas and InterMountain Post 2016 frames