REQUEST A QUOTE  -  STREAMLINED BACKSHOP INSTALLATIONS AND REPAIRS  -  MORE INFO 
ESU - Electronic Solutions Ulm

ESU 59220 LokPilot 5 Fx Standard NMRA DCC Function-Only Decoder - NEM652 8-pin Wired Plug

(No reviews yet) Write a Review
UPC:
404464559220
MPN:
59220
Condition:
New

Save More With Volume Discounts…

Buy 5 - 9 $36.44 each
Buy 10 or above $35.32 each
  • ESU 59220 LokPilot 5 Fx Standard NMRA DCC Function-Only Decoder - NEM652 8-pin Wired Plug
  • ESU 59220 LokPilot 5 Fx Standard NMRA DCC Function-Only Decoder - NEM652 8-pin Wired Plug
MSRP: AUD $43.74
Price: AUD $37.18
— You save AUD $6.55

Description

ESU 59220 LokPilot 5 Fx Standard NMRA DCC Function-Only Decoder - NEM652 8-pin Wired Plug
 

LokPilot Fx dcc decoders provide function control for lighting effects, and in some cases they even provide sound output, just like their full featured siblings loksound and lokpilot but lokfunction decoders do not posess any capability to control a dc motor.
 
They are perfect for use in "dummy", non-powered locomotives and rolling stock like passenger cars and cabeese where it is desirable to have lots of lights to turn on and off, to have diesel engine or generator sounds, but where there is no need to provide power or speed control to operate a dc motor.

 
The LokPilot 5 Fx DCC is a function decoder without motor output and is therefore perfect for installation in control cars or function models. As the "twin brother" of the LokPilot 5 Fx, it shares its characteristics and also the basic characteristics of all other LokPilot 5 decoders, but is a pure DCC decoder.

The LokPilot 5 Fx DCC is supplied in three variants: In addition to the "classic" version with 8-pole NEM 652 wiring harness, a variant for the 21MTC interface and with PluX22 interface is also available.

Modes

The LokPilot 5 Fx DCC is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders register fully automatically at a suitable digital center.

It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.

The LokPilot 5 Fx DCC decoder detects the Märklin® brake distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or with equal voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An automatic ABC pen train allows automatic commuting between two stations. Although this de-coder does not have an engine output, this is also important for a function decoder in order to be able to synchronize control cars and motor cars.

The LokPilot 5 Fx DCC decoder can be used on analog DC webs.

The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.

Functions

The LokPilot 5 Fx DCC has been equipped with an astonishing number of function outputs. Depending on the cutting position design, each LokPilot 5 Fx DCC decoder offers at least 10 reinforced function outputs with 250mA output current each. For the versions with PluX22 or 21MTC interface, 4 outputs are added for controlling servos or logic level outputs. All important light radios are available. The brightness of each output can be set separately.

Interaction

The LokPilot 5 Fx DCC is designed for interaction with the LokSound 5 and the LokPilot 5 decoders: for example, it is possible to equip the locomotive of a multiple unit with a LokSound 5 decoder and the control car with a LokPilot 5 Fx DCC. Provided the same address, both behave absolutely identically. The identical arrangement of the CVs facilitates the tuning of the two decoders.

Operational reliability

On request, a PowerPack can be connected to the LokPilot 5 Fx DCC to bridge dirty rail cuts.

Protection

Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.

Decoder Specifications:

  • Size: 21.4 mm x 15.5 mm x 4.5 mm  (0.84 in x 0.61 in x 0.18 in)
  • Interface: NEM652 8-pin Wired Plug
  • Motor Rating: NA - Function-Only
  • BEMF: NA
  • Functions:
    • NEM652 8-pin Wired Plug - 10 amplified outputs for special functions
    • NEM658 PluX22 Integral Connector and NEM660 21MTC Integral Connector - 10 amplified outputs for special functions, 4 Logic-level outputs or Servo Outputs (total: Up to 14 outputs)
  • Protocol: DCC with RailComPlus®
  • Additional Features:
    • Updatable with ESU-LokProgrammer
    • Connection interface for RC servos and SUSI modules
    • Optional optional PowerPack storage capacitor connections
Interface
  • NEM652 8-pin Wired Plug
  • NEM658 PluX22 Integral Connector
  • NEM660 21MTC Integral Connector
 
View AllClose

Additional Resources

View AllClose

Additional Information

PRODUCT CLASS :
Standard (HO-S-O*)
DECODER TYPE:
Function Only
DECODER INTERFACE (PRIMARY):
NEM652 - NMRA 8-pin
DECODER INTERFACE (SECONDARY):
NA
SIZE-INCH (L x W x H):
0.65 x 0.61 x 0.18 in
SIZE-METRIC (L x W x H):
16.5 x 15.5 x 4.5 mm
MOTOR CURRENT (CONTINUOUS):
NA
MOTOR CURRENT (PEAK):
NA
FUNCTION CURRENT (MAX):
250mA each
NORMAL OUTPUT FUNCTIONS:
10
LOGIC-LEVEL FUNCTIONS:
4*
SERVO OUTPUT FUNCTIONS:
2*
FUNCTION INPUTS:
0
KEEP-ALIVE INTERFACE:
Hardwire - Solder Pad**
KA INPUT VOLTAGE (MAX):
NA
KA TOTAL CAPACITANCE:
NA
CV PROGRAMMING:
Service Mode + P.O.M.
FIRMWARE UPDATE:
Yes - LokProgrammer required
PROTOCOL:
NMRA DCC
BI-DIRECTIONAL COMMUNICATION:
RailCom Plus
ADDITIONAL FEATURES:
NA
NOTES (1):
* - Optional configuration - see manual
NOTES (2):
** - Optional 2 or 3 wire KA interface
View AllClose