SPROG LCC IO-LCC Network IO Interface Module

The IO-LCC is a cost reduced version of the SERVOIO-LCC with differences in physical format and connector options. This User Guide covers the differences between the SERVOIO-LCC and IO-LCC.

Features

The main features of the IO-LCC are

• Two I/O banks of eight channels for a total of sixteen channels
• Support for servos on bank A (requires external hardware)
• Eight individual logic level I/O channels per bank
• Jumper selectable pull-up/down for I/O channels
• Flexible configuration through the CDI (Configuration Description Information)
• Two status LEDs configurable through the CDI
• Two pushbuttons configurable through the CDI
• Can consume own generated events for event chaining (secondary events)
• Dual RJ45 for network pass-through or terminator
• Powered from the LCC network for simple I/O
• Bootloader for firmware updates

Unlike the SERVOIO-LCC, the IO-LCC does not have servo connectors, servo power supply nor high current output option. It does, however, use the same firmware as the SERVOIO-LCC and can be used with servos with additional hardware, see 2.4 USING THE IO-LCC WITH SERVOS in the product manual.

Electrical Specifications

The IO-LCC takes power from the LCC network, consuming less than 50. Additional loads taking power from the network (e.g., LEDs connected to I/O) must be added to this when calculating the total power budget for the LCC network.

If the IO-LCC is used to drive servos, an external 5V powers supply must be used to power the servos.