ZIMO STARTGFU MX10 DCC Command Station with MX33FU Wireless Handheld and 600W Power Supply

ZIMO STARTGFU MX10 DCC Command Station with MX33FU Wireless Handheld and 600W Power Supply


Package Contents:

ZIMO MX10 DCC Command Station

ZIMO NG600 Power Supply - 600W 30V 20A IP65 CV+CC

ZIMO MX33FU Wireless Cab DCC Walk Around Hand-held Throttle

Plus Terminal Block Set, USB Stick, and cables.

ZIMO MX10 DCC Command Station


The MX10 is the central unit or "Command Station" of the digital control system from ZIMO.

The ZIMO Command Station features modern technology and compact design.

At first glance, you see the very small dimensions (18 cm wide, 3 cm high), and the lack of heat sinks and fans. 

Thanks to state-of-the-art power electronics - five high-frequency switching regulators for rail outputs and supply voltages - the device does not run hot, despite 20 A on the rail and 5 A on the bus (continuous load!).

The ZIMO system takes care of applications where high currents could cause damage (N-gauge, etc).

Thanks to special circuitry which manage shorts on the track when connected to the MX10, there are fewer sparks than on many weaker digital control systems.

The ZIMO system offers more than "a lot of power".

The advanced functionality of the ZIMO system is made possible through the incorporation of a high quality processor, expanded memory and robust software inside, plus quality measurement technology for precision RailCom detectors, a variety of integral bus connections and a standard integrated radio system.

MX10 Basic Equipment

The ZIMO MX10 DCC Command Station set includes the following: 

• Command Station
• WiMi Antenna
• Terminal Block Set

NOTE: Power supply and handheld controller sold separately.

MX10 Front View

• Knob: Adjusting current, power supply and other values, throttle, collective Stop (press for 2 sec), Standby initiate (4 sec), .. 
• Multi-color screen: In normal operation display voltages and currents of the rail outputs, AOS inputs, communication, etc.
• Button 1: Enable and define "automatic operations", Start decoder update, etc. 
• Button 2: Access MX 10 menu (after scrolling knob), Start decoder sound loading, etc. 
• Button 3: Start the driving operation from the MX10 ("Basecab"), General "Back" button, etc. 
• USB socket for USB flash drive for carrying out the self-update, data loading and saving, decoder update and sound loading 
• "SUSI" interface for fast sound loading for ZIMO decoders (takes about 1 min instead of 10 min) 
• CAN socket for ZIMO cabs (controllers MX33, MX32, MX31, MX21, MX2) and ZIMO modules (MX8, MX9) 
• XNET jack for input devices such as Roco Lokmaus, Massoth Dimax Navigator, and other XNET devices