LCC Layout Command Bus Products

RR-CirKits BOB-S Screw Terminal Break Out Board This board is designed to break out the 10 pin IDC ribbon cables into minature screw terminals for easy connections. (0.4" wide by 2.5" long).

RR-CirKits BOD-8-SM Block Occupancy Detector This new board is compatible with LCC node sample mode which allows using output drivers on the same I/O port. This board operates as a DCC occupancy...

RR-CirKits BOD4 Block Occupancy Detector This board operates as a DCC occupancy detector for 4 blocks using remote CT coils. It outputs logic levels, and has a RR-CirKits standard ribbon connector...

RR-CirKits BOD4-CP Block Occupancy Detector w/ Dual Turnout Driver This board operates as a DCC occupancy detector for 4 blocks using remote CT coils. It outputs logic levels, and has a RR-CirKits...

RR-CirKits Breakout-QL Quik-Link 10-pin IDC Breakout Board This Breakout board allows easy solder free connections from up to 8 Quik-Link devices to 10 pin I/O cables using 3 wire servo style cables...

RR-CirKits Button Quik-Link Facia-mount Push Button - Indicator Light Unit The Button-QL is an LCC Sample Mode compatible indicator/switch unit. When used with an LCC node the switch function and...

RR-CirKits FOB-A Direct Drive Fan Out Board for LEDs This board is specifically designed to direct drive eight LED's from a single RR-CirKits port. It includes on board locations for current limiting...

RR-CirKits FOB-C Dual Direct Drive Fan Out Board for LEDs This board is specifically designed to terminate the dual cable, eight stall motor, connections from a single SMD-8 board. It includes on...

RR-CirKits I/O Test-SM Sample Mode I/O Test Board This board contains 8 push button switches and 8 LED pairs. It is designed to quickly test the I/O ports on any of our boards such as the Tower LCC,...

RR-CirKits Isolator-8 8-line Input Isolation Board This board is specifically designed to isolate 12 volt DC voltages from the RR-CirKits logic level inputs. This allows connection of legacy (12V...

RR-CirKits LCC Buffer-USB NMRA CAN bus LCC® to USB interface. 2,500 Volt Digital isolation between CAN bus LCC® a

RR-CirKits LCC Power-Point LCC Power-Point ties together 2 LCC jacks, a Traffic Monitor, and a power supply. Create a powered LCC bus for simple wiring by powering your LCC Nodes over the cable. The...

RR-CirKits LCC Repeater LCC Repeater features: Bit level repeater connects two LCC ® CAN bus segments.

RR-CirKits LCC Starter Kit Introductory price for a LCC Buffer-USB, a Power-Point, 2 Terminators, includes 1' LCC cable and USB cable.

RR-CirKits LCC Terminator Pair NMRA CAN bus LCC® Termination Pair. May be used to provide the required termination at each end of the CAN bus LCC® Balanced CAN termination provides the best noise...

RR-CirKits LCC VampMeter LCC Voltmeter and Ammeter features: Easily measure your CAN bus power.

RR-CirKits LCC-LocoNet Gateway LCC (Layout Command and Control) 1024 function LCC – LocoNet translator LCC-LocoNet Gateway M

RR-CirKits OI-IB-8 8-line Input Opto-Isolation Board This board is normally used for block detection on three rail layouts. This version of the board includes internal current limiters. Useful...

RR-CirKits RB-2 Dual Relay Board Relay Board - 2 is a Dual 10A DPDT relay board with logic level drivers. It is suitable for use with TC Mark II, TowerMan, Tower LCC, or other logic level output...

RR-CirKits RB-4 Quad Relay Board Relay Board - 4 is a Quad 10A SPDT relay board with logic level drivers. It is suitable for use with TC Mark II, TowerMan, Tower LCC, or other logic level output...

RR-CirKits SDB-4 4-Output Searchlight Driver Board This 4 output board is specifically designed to directly drive 4 four aspect signals utilizing bi-polar or three wire LED's and includes a yellow...

RR-CirKits SHD-2 8-Output Dual Signal Head Driver Board This 8 output signal head driver is a DCC accessory decoder. Includes prototypical lamp fade, brightness adjustment. Built in resistors allow...

RR-CirKits Signal LCC-32H Signal LCC-32H LCC (Layout Command and Control 8 line Input Output board Plus 32 Head controller with special effects

RR-CirKits Signal LCC-P Signal LCC-P LCC (Layout Command and Control 8 line Input Output board Plus 16 LED Driver with special effects

RR-CirKits Signal LCC-S Signal LCC-S LCC (Layout Command and Control 8 line Input Output board Plus 16 LED Driver with special effects

RR-CirKits SMD-8 8-Output Stall Motor Driver Board LCC sample mode compatible. This 8 output, optically isolated, low current "H" bridge driver is designed for control of 8 stall motor switch...

RR-CirKits SSSB-Atlas Dual Decoder/Driver for Atlas Dual Head Micro JST Signals Dual head Decoder/Driver for Atlas Micro JST equipped signals. Includes 3-1/2" M-F polarized pigtails.

RR-CirKits SSSB-Atlas Single Decoder/Driver for Atlas Single Head Micro JST Signals Single head Decoder/Driver for Atlas Micro JST equipped signals. Includes 3-1/2" M-F polarized pigtails.

RR-CirKits SSSB-Digitrax Dual Decoder/Driver for Digitrax Dual Head 10-pin IDC Signals Dual head Decoder/Driver for 10 pin header equipped signals. Includes 3-1/2" M-F polarized pigtails.

RR-CirKits SSSB-Dwarf Single Decoder/Driver for Showcase Miniatures 2194 Type SA. Dwarf Signals Single head Decoder/Driver for Showcase Miniatures Type SA. (SKU: 2194) Includes 3 color LED...

RR-CirKits SSSB-S Dual Decoder/Driver w/ Screw Terminals for Hardwire Signals Dual head Decoder/Driver with screw terminals for wire equipped signals. Includes 3-1/2" M-F polarized pigtails.

RR-CirKits SSSB-S Single Decoder/Driver w/ Screw Terminals for Hardwire Signals Single head Decoder/Driver with screw terminals for wire equipped signals. Includes 3-1/2" M-F polarized pigtails.

RR-CirKits Tortoise-QL Quik-Link Tortoise Driver-Adapter Board w/ Solderless Breakaway Connector The Tortoise Quik-Link is a plug on Tortoise driver board. Breakaway connector inserts allow use on...

RR-CirKits Tortoise-QL-Package Quik-Link Tortoise Driver-Adapter Board w/ Tortoise 800-6000 Slow Motion Switch Machine Tortoise Quik-Link with new style Tortoise 800-6000 Slow Motion Switch Machine...

RR-CirKits Tortoise-TAB Tortoise Adapter Board w/ Solderless Breakaway Connector The TAB is designed to provide a solder-less connection between the SMD-8 and Tortoise. It includes 10 pin daisy chain...

RR-CirKits Tortoise-TAB-Package Tortoise Adapter Board w/ Tortoise 800-6000 Slow Motion Switch Machine Tortoise Adapter Board with new style Tortoise 800-6000 Slow Motion Switch Machine included...

RR-CirKits Tower LCC General Purpose 16 Line Input/Output node for NMRA CAN bus LCC®. Logic level interface compatible with other standard RR-CirKits I/O modules. Boot Loader for user install able...

RR-CirKits Tower LCC+Q General Purpose 16 Line Input/Output node for NMRA CAN bus LCC® PLUS Text based Logic Engine. Logic level interface compatible with other standard RR-CirKits I/O modules. Boo

The SPROG family of DCC devices  

The SPROG family of DCC devices  

SPROG LCC ButtonLED LCC Network Test Module The ButtonLED is a small test board for our SPROG LCC I/O modules. It has 8 push buttons and 8 LEDs (Li

SPROG LCC IO-LCC Network IO Interface Module The IO-LCC is a cost reduced version of the SERVOIO-LCC with differences in physical format and connec

SPROG LCC POWER-LCC Network Power Module The power LCC allows power to be supplied to an LCC network.

SPROG LCC SERVOIO-LCC Network Servo & IO Interface Module To be successful in using the SERVOIO-LCC you should be familiar with basic LCC topic

SPROG LCC TERM-LCC Network Termination Module The CAN bus of an LCC or OpenLCB network must be properly terminated for correct operation. The TERM-

SPROG LCC USB-LCC Network to PC Interface Module Use a USB-LCC to interface your LCC/OpenLCB network to a WIndows, Linux or MacOS computer running

The SPROG family of DCC devices  

The SPROG family of DCC devices  

TCS 1597 BA-100 Booster Adapter     The BA-1

TCS 1598 LT-50 LCC Throttle Facia Panel    

TCS 1599 LT-50 Facia LT Panel     This produ

TCS 2150 Block-8-RCS LCC 8 Channel RailCom and Block Occupancy Detector with Power Management8 Channel RailCom® Detection, Block Occupancy Detection and Short Circuit

TCS B-106 Auxiliary DCC Booster     <

TCS B-106 Auxiliary DCC Booster     <

TCS CS-105 DCC & LCC Command Station    

TCS CS-105 DCC & LCC Command Station    

TCS LT-50 Handheld "Layout Throttle"     The

TCS UWT-100 Universal WiFi Throttle       The UWT-100 Universal WiFi Throttle from TCS is the new standard in WiFi control for model railroads. This throttle brings a new level of ergon

TCS UWT-50 Universal WiFi Mini-Throttle    

TCS UWT-50 Universal WiFi Mini-Throttle