Parts & Supplies

Digitrax DHDP DCC Decoder 9-Pin JST Dummy Plug (5-pk)     Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack)   This product is also suitable for use with mnany ESU LokSound, TCS, Soundtraxx,...

Digitrax DHWH DCC Decoder 9-pin JST to Hardwire Harness (5-pk)     Digitrax 9 pin to bare wire harnesses in 5 packs.   This product is also suitable for use with mnany ESU LokSound, TCS, Soundtraxx, Digitrax, and MRC decoders. ...

Digitrax DHWHP DCC Decoder 9-pin JST to 8-pin NMRA (NEM652) Harness (3)     Digitrax 9 pin to DCC medium plug long harness (3)   This product is also suitable for use with many ESU LokSound, TCS, Soundtraxx, Digitrax, and MRC...

Digitrax DHWH DCC Decoder 9-pin JST to 8-pin NMRA (NEM652) Harness (1)     Digitrax 9 pin to DCC medium plug short harness (1)   This product is also suitable for use with many ESU LokSound, TCS, Soundtraxx, Digitrax, and MRC...

Digitrax PX112-2 Power Xtender for PX Socket - 2-pin Micro JST Plug   Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. PX112-2 Plug N Play...

ESU Wire Harness, Model Number 51950If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our harnesses 51950 resp. 51951: Solder in the harness and then plug in the...

ESU 51957 21-HW - 21MTC Adapter Board 3 w/ AUX 3, AUX 4, AUX 5 & AUX 6 - NEM660 21MTC Integral Connector     Dimensions:  15.5mm x 31mm x 7mm To Top Of Pins Our new adapter board 3 for decoders with 21MTC interface is best suited for...

ESU 51958 21-HW - PluX22 Adapter Board 1 - NEM658 PluX22 Integral Connector   Our new adapter board 3 for decoders with PluX22 interface is best suited for everyone intending to digitise a loco without interface but with many functions without...

ESU 51966 Change Over Ski for LokSound or LokPilot w/ 21MTC     Dimensions:  24mm x 43mm x 12.7mm To Top Of Pins   Many railcars are equipped with a grinder at both ends. For proper function in block locations and for timely stopping...

ESU 51967 21-HW - 21MTC Adapter Board - NMRA-NEM660 21MTC Integral Connector     Dimensions:  17mm x 27.2mm x 7mm To Top Of Pins   The 21 MTC adapter board is suitable for digitising a loco without interface and for the case you do...

ESU 51968 21-HW - 21MTC Adapter Board w/ AUX 3, AUX 4, AUX 5 & AUX 6     Dimensions:  20mm x 40mm x 7mm To Top Of Pins   The 21 MTC adapter board 2 is also suitable for digitising a loco without interface. It is very helpful, if...

ESU 51970 NEM660 21MTC Integral Connector I/O Expansion Board (4x AUX, 2x Servo, Smokeunit) for LokSound, LokPilot V4.0     Dimensions:  15.5mm x 30.3mm x 8.4mm To Top Of Pins   With this expansion board you can easily expand your...

ESU 53951 NEM660 21MTC Integral Connector to Hübner Schienenbus Adapter Board for LokSound or LokPilot Decoders     This adapter board is for owners of a Hübner railbus in track 1 (Art. No. 4070 or 4071) thought. There, a LokSound 2...

Grizzly Mountain Engineering 4-point Sound Cam     Model Railroad Sound Cams   We are the number one manufacturer of Sound Cams for Model Railroad sound in the world.  Our cams work perfectly with through the rail style sound (GME,...

Grizzly Mountain Engineering 4-point Sound Cam     Model Railroad Sound Cams   We are the number one manufacturer of Sound Cams for Model Railroad sound in the world.  Our cams work perfectly with through the rail style sound (GME,...

Grizzly Mountain Engineering 4-point Sound Cam     Model Railroad Sound Cams   We are the number one manufacturer of Sound Cams for Model Railroad sound in the world.  Our cams work perfectly with through the rail style sound (GME,...

NCE Medium "No-Halt" DCC Decoder Stay-Alive Device - Hardwire   Dimensions: 2.14" x 0.640 x 0.400" (54 x 16 x 10 mm) High power version for larger locomotives - Eliminates or reduces the following due to dirty track or unwired switch...

NCE Small "No-Halt" DCC Decoder Stay-Alive Device - HardwireThe small no halt will allow a typical HO locomotive to travel up to 3 feet of dirty track and still operate the lights with NO FLICKER. Do not exceed DCC track voltage of 15v...

NixTrainz Decoder Buddy 12 Output V5B 2.2k Ohm Resistor 21-HW - 21MTC Adapter Board - NEM660 21MTC Integral Connector     Decoder Buddy V5 and V5B The Decoder Buddy V5 and V5B were developed for the 12 output decoders and include a couple...

NixTrainz Decoder Buddy 8 Output Original 2.2k Ohm Resistor 21-HW - 21MTC Adapter Board - NEM660 21MTC Integral Connector     Decoder Buddy V5 and V5B The Decoder Buddy V5 and V5B were developed for the 12 output decoders and include a couple...

NixTrainz Decoder Buddy Mini 1k Ohm Resistor 21-HW - 21MTC Adapter Board - NMRA-NEM660 21MTC Integral Connector   Decoder Buddy V5 and V5B The Decoder Buddy V5 and V5B were developed for the 12 output decoders and include a couple added features...

SoundTraxx 810068 Replacement Tsunami Speaker Harness, Steam - Hardwire - NMRA 3-pin JST Plug to Hardwire     Replacement 3-Wire to JST Speaker and Cam harness.   

SoundTraxx 810069 Replacement Tsunami Power Harness, Steam and Diesel - NMRA 9-pin JST to Hardwire     Replacement 9-wire to JST power harness for all TSU-2200 or ECO-200 Digital Sound Decoders.    

SoundTraxx 810132 DBX-9000 Locomotive-To-Tender Wiring Kit - NMRA 9-pin Micro JST Adapter Board to Hardwire     The DBX-9000 is a compact 9-wire connector and harness assembly for use with universal-style DCC decoders. It is designed to...

Soundtraxx 810135 Wire Harness - NMRA 9-pin JST to NEM652 8-pin Wired Plug     This harness easily converts TSU-2200 or ECO-200 Digital Sound Decoders to plug and play decoders for use with models equipped with an NMRA 8-pin socket.

SoundTraxx 810140 Tsunami Current Keeper - 2-pin Micro JST Plug     The SoundTraxx CurrentKeeper™ is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup...

Soundtraxx 810157 Wire Harness, Econami/Tsunami2 4-Pin Speaker Harness - NMRA 4-pin Micro JST to Hardwire     Replacement 4-wire speaker and lighting harness for Tsunami2 and Econami Digital Sound Decoders.  

Soundtraxx 810158 CurrentKeeper Wire Harness - 2-Pin Micro JST to 2-Pin Micro JST     Easily connect a CurrentKeeper or extra capacitor to any SoundTraxx decoder equipped with a 2-pin "Quick Plug" to improve performance over dirty track and...

Soundtraxx 810159 JST-21PNEM Adapter Board - NMRA 9-Pin JST to NEM660 21MTC Integral Connector     Easily adapt any SoundTraxx 21PNEM decoder to an NMRA 9-Pin DCC "quick plug" equipped model. This adapter can also be used with SoundTraxx 9-Pin...

TCS 1032 DCC Decoder VR1.5 Voltage Regulator - Hardwire     Never wire another resistor for 1.5v bulbs! The VR1.5 can be used with any decoder to supply a 1.5V regulated supply for all of your light bulbs.   To use the VR1.5, connect the...

TCS 1033 Wire Harness - T-WH - NMRA 9-pin JST to Hardwire     9-Pin JST for use with decoders that use a 9-Pin JST interface. Use this harness to connect any decoder with a 9-Pin JST connector to your locomotive. Examples of decoders with this...

TCS 1036 Wire Harness - C628 - 8-pin NMRA (NEM652) to 9-pin JST for C628     C628 is a harness for the C628/C630 for the T series.    

TCS 1037 Wire Harness - E6 - 8-pin NMRA (NEM652) to 9-pin JST for P2K E6     The E6 harness is designed to fit in the Life Like Proto 2000 E6 Locomotive.With special wiring for mars light.  Works with all T series decoders.  

TCS 1041 Wire Harness - P2K - 8-pin NMRA (NEM652) to 9-pin JST for P2K Engines     P2K is a T series harness for the Life Like Proto 2000 with a NMRA plug.  

TCS 1044 Wire Harness - UK-SH - Short 8-pin NMRA (NEM652) to 9-pin JST for UK Style     UK-SH is a Short United Kingdom harness for the T series. 

TCS 1046 Wire Harness - T-VO - 2.5cm 8-pin NMRA (NEM652) to 9-pin JST for VO-1000     T-VO is a T series harness for the VO-1000 and most other Stewart locomotives.    

TCS 1186 Wire Harness - C628H - 8-pin NMRA (NEM652) to 9-pin JST for Stewart C628H-C630H     C628-H is harness for the C628-H/C630-H for the T series.   

TCS 1187 Wire Harness - MC-C628-630 - 2.5cm 8-pin NMRA (NEM652) to 7-pin Micro JST for Stewart C628 and C630     MC-C628/C630 is a MC series harness for the Stewart C628 and C630 with a NMRA plug.    

TCS 1195 Wire Harness - E7 - 8-pin NMRA (NEM652) to 9-pin JST for P2K E7     This E7 harness is designed for Life Like Proto 2000 E7 loco. With special wiring for the Mars light. Works with all T series decoders.  

TCS 1253 8-pin NMRA (NEM652) Socket     8 pin NMRA socket, premade and ready for wires to be soldered on   Can also be used as an extension plug for the DP5 and DP2X decoders.  

TCS 1254 8-pin NMRA (NEM652) Plug 8 pin NMRA plug, pre-made and ready for wires to be soldered on from a decoder/etc. Can be plugged into any locomotive with an 8-pin connector. NOTE: This product does not include wires.    

TCS 1255 8-pin NMRA (NEM652) Plug Kit     All the pieces you need to put together a 8 pin NMRA plug.  

TCS 1260 9-Pin JST Connector     9-pin micro-JST surface mount female connector - used on the T series of decoders.  

TCS 1345 9-Pin JST Extension Plug with 6" Wire Leads (5pk)     9-Pin JST extension plug equipped with 6" function wires.   Great to use with sound decoders as well as with other DCC products. This is a 5 Pack.  

TCS 1352 Wire Harness - T-1-21 - 2.5cm NEM660 21MTC to 9-pin JST     The T-1"-21 is an adapter harness with 1" (2.54 cm) wires used for connecting a 9-Pin JST to a 21-Pin motherboard. 9-Pin JST decoders such as the WOW101, T1,...

TCS 1353 Wire Harness - T-3.5-21 - 8.9cm NEM660 21MTC to 9-pin JST     The T-3.5"-21 is an adapter harness with 3.5" (8.89 cm) wires used for connecting a 9-Pin JST to a 21-Pin motherboard. 9-Pin JST decoders such as the WOW101, T1,...

TCS 1354 Wire Harness - T-5-21 - 12.7cm NEM660 21MTC to 9-pin JST     The T-5"-21 is an adapter harness with 5" (12.7 cm) wires used for connecting a 9-Pin JST to a 21-Pin motherboard. 9-Pin JST decoders such as the WOW101, T1,...

TCS 1358 21-HW - 21MTC Adapter Board (5-pk) - NEM660 21MTC to Hardwire     The 21-HW (female) is a circuit board with a 21-pin NEM660 (MTC21) socket and solder pads to connect wires. The female 21-pin socket may be used to adapt a harnessed...

TCS 1359 Wire Harness - T-1 - 2.5cm 8-pin NMRA (NEM652) to 9-pin JST     T-1" is a 1 in. T series harness.    

TCS 1360 Wire Harness - T-1R - 2.5cm 8-pin NMRA (NEM652) to 9-pin JST Reversed     T-1"R is a 1" T series harness with a 8 NMRA plug rotated 180 degrees.  

TCS 1361 Wire Harness - T-3.5 - 88.9cm 8-pin NMRA (NEM652) to 9-pin JST     T-3.5" is a 3.5" harness for the T series with a NMRA plug.      

TCS 1362 Wire Harness - T-3.5R - 8.9cm 8-pin NMRA (NEM652) to 9-pin JST Reversed     T-3.5"R is a 3.5" T series harness with a 8 NMRA plug rotated 180 degrees.  

TCS 1363 Wire Harness - T-5 - 125cm 8-pin NMRA (NEM652) to 9-pin JST     T-5" is a 5 in. T series harness.   

TCS 1364 Wire Harness - T-5R - 12.5cm 8-pin NMRA (NEM652) to 9-pin JST Reversed     T-5"R is a 5" T series harness with a 8 NMRA plug rotated 180 degrees.  

TCS 1365 Wire Harness - T-3.5-UK - 8.9cm 8-pin NMRA (NEM652) to 9-pin JST UK-Style     The T-3.5"-UK is a 3.5" United Kingdom harness for the T series.  

TCS 1374 9-pin JST Female Socket - Hardwire Adapter Board (5-pk)     The 9-Pin JST Female Socket may be used in conjunction with a 9-pin JST Male Harness. The board has 9 solder pads for easy wiring to locomotive components or a decoder. If you...

TCS 1653 21-HW - 21MTC Adapter Board (5-pk) - NEM660 21MTC to Hardwire     The 21-HWM (21-pin HardWire Male) is a circuit board with a 21-pin NEM660 (MTC21) connector and solder pads to connect wires. The male 21-pin socket may be used with...

TCS 1667 KA4-C DCC Decoder Keep-Alive Device - 2-pin Mini ConnectorTCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  The KA4-C will power an...

TCS 1668 KA4 DCC Decoder Keep-Alive Device - Hardwire TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA4 will power an HO-Scale locomotive with...

TCS 1669 KA5 DCC Decoder Keep-Alive Device - Hardwire TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA5 includes an additional fifth...

TCS 2000 KA3 DCC Decoder Keep-Alive Device - Hardwire TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA3 will power an HO-Scale locomotive with...

TCS 2001 KA3-C DCC Decoder Keep-Alive Device - 2-pin Mini ConnectorTCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  The KA3-C will power an...

TCS 2004 KA3-P DCC Decoder Keep-Alive Device - 2-pin Micro JST PlugTCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. Newly-redesigned and coming in at...

TCS 2005 KA4-P DCC Decoder Keep-Alive Device - 2-pin Micro JST PlugTCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA4-P will power an HO-Scale...

TCS 2006 KA5-P DCC Decoder Keep-Alive Device - 2-pin Micro JST PlugTCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA5 includes an additional...

ZIMO  8-pin NMRA (NEM652) Female Wired Connector   This is a 8-pin female header on 2,54 mm pin spacing.  This is the mating connector for a ZIMO R - Type decoder, e.g. MX630R, MX645R, and can be installed in a model without an interface...

ZIMO ADAMKL NEM660 21MTC Adapter Board - Screw Terminals     The ADAMxx-series adapter boards are designed for use NEM660 21MTC decoders, including the MX631C, MX634C and MX644C model decoders.CAUTION: This product should not be used with...

ZIMO ADAMKL NEM660 21MTC Adapter Board - Screw Terminals     The decoder is plugged into the male connector of the adapter board which features interface connections and features for easy, convenient installation and improved functionality in...

ZIMO ADAMTC NEM660 21MTC Adapter Board - Hardwire     The decoder is plugged into the male connector of the adapter board which features interface connections and features for easy, convenient installation and improved functionality in large...

ZIMO ADAMTC15 1.5V Function Output NEM660 21MTC Adapter Board - Hardwire     The decoder is plugged into the male connector of the adapter board which features interface connections and features for easy, convenient installation and improved...

ZIMO ADAMTC50 5.0V Function Output NEM660 21MTC Adapter Board - Hardwire     The decoder is plugged into the male connector of the adapter board which features interface connections and features for easy, convenient installation and improved...

ZIMO ADAPLU 1.5V Function Output NEM658 PluX22 Adapter Board - Hardwire     The ADAPxx-series adapter boards are designed for use NEM658 PluX22 decoders, including the ZIMO MX600P12, MX623P12, MX630P16, MX633P16, MX633P22, MX645P16, MX645P22...

ZIMO ADAPLU 5.0V Function Output NEM658 PluX22 Adapter Board - Hardwire     The ADAPxx-series adapter boards are designed for use NEM658 PluX22 decoders, including the ZIMO MX600P12, MX623P12, MX630P16, MX633P16, MX633P22, MX645P16, MX645P22...

ZIMO ADAPLU NEM658 PluX22 Adapter Board - Hardwire     The ADAPxx-series adapter boards are designed for use NEM658 PluX22 decoders, including the ZIMO MX600P12, MX623P12, MX630P16, MX633P16, MX633P22, MX645P16, MX645P22 and MX648P16 model...

ZIMO ADAPLUMTC Adapter Board - NEM658 PluX22 Integral Connector to NEM660 21MTC Integral Connector     Adapter board for connecting PluX22 with 21MTC boards   only necessary with certain 21MTC locomotive boards - e.g. Sudexpress Eurodual,...

ZIMO Gold Capacitor - GOLMLANG Electrolytic Super Cap Mini Straight Module Finished module made up of 7 long-form Goldcaps connected in series for " category 2 " decoders (for MS decoders such as MS450 or MS440 as a larger alternative to MGOLANG; for MX...

ZIMO Gold Capacitor - GOLMRUND Electrolytic Super Cap Mini Round Module Finished module made up of 7 round Goldcaps connected in series for " category 2 " decoders (for MS decoders such as MS450 or MS440 as a larger alternative to MGOBLOCK; for MX or MS...

ZIMO LIPLDHW1 HO Passenger Car Lighting Kit w/ Integrated DCC - Warm White     HO, TT Scale model with neutral white LEDs   Specifications: 11.67 x 0.33in - .11in Tall (296 x 8.2mm - 2.8mm Tall) - Adjustable length Integrated DCC with...

ZIMO LIPLDHY1 HO Passenger Car Lighting Kit w/ Integrated DCC - Yellow     HO,TT Scale model with yellow LEDs   Specifications: 11.67 x 0.33in - .11in Tall (296 x 8.2mm - 2.8mm Tall) - Adjustable length Integrated DCC with RailCom 14...

ZIMO RAUSIH01 Smoke Generator Controller BoardThe RAUSIH01 board is used to control single smoke generators for track H0 (and small track 0), together with ZIMO track H0 decoders. The RAUSIH01 can only be used if the smoke generator has a 100 kOhm NTC...