ZIMO DCC

PRE-OWNED - ZIMO MXTAPV DCC Decoder Test and Connector Board - Large and Small Scale Store Programming unit used for decoder testing, firmware updates and sound file loading.  Sold as is. ZIMO...

ZIMO MSTAPK DCC Decoder Test and Connector Board - Small Scale with E24 InterfaceThe ZIMO MSTAPK Decoder Test and Connector Boards are the perfect accessory for use with the MXULFA, MX10, and other...

ZIMO MX33FU Wireless Cab DCC Walk Around Hand-held ThrottleThrottle The tethered MX33 and its wireless version MX33FU walk around hand-held throttles, are the main input devices of digital...

ZIMO MX33 Tethered Cab DCC Walk Around Hand-held Throttle The tethered MX33 and its wireless version MX33FU walk around hand-held throttles, are the main input devices of digital multi-train control...

ZIMO MXTAP SUSI CableReplacement 4-pin cable for MXULFA or MXTAP SUSI connection. Length: 6cm  

ZIMO Capacitor - SUPERCAP68 6800 uF 15V SMD   "Supercap" (contains 6 gold caps in the metal housing), for decoder of "category 2" (i.e. with direct energy storage connection), 15 V - variant...

 ZIMO NEM651 6-pin Male ConnectorThis is a 6-pin male header on 1,27 mm pin spacing to make a ZIMO F - Type decoder from a normal hardwired decoder, e.g. convert a MX630 to a MX630F.This...

ZIMO NEM660 21MTC 22-pin Male ConnectorThis is the mating connector for a ZIMO C or D - Type 21MTC decoder, e.g. MX634C, MX644D, and can be installed in a model without an interface to make the...

The ZIMO StEin Stationary Equipment Module "Stone" - modules ( St ationär- A directional modules) are of which are intended to be used together with a base unit of the ZIMO MX10 series as a...

The ZIMO StEin Stationary Equipment Module "Stone" - modules ( St ationär- A directional modules) are of which are intended to be used together with a base unit of the ZIMO MX10 series as a...

The ZIMO StEin Stationary Equipment Module "Stone" - modules ( St ationär- A directional modules) are of which are intended to be used together with a base unit of the ZIMO MX10 series as a...

ZIMO Terminal Block - 3 Position 5.08mmReplacement 3 Position 5.08mm Terminal Block for MX10.  

ZIMO Terminal Block - 3 Position 3.5mmReplacement 3 Position 3.5mm Terminal Block for MX10.  

ZIMO Terminal Block - 2 Position 7.62mmReplacement 2 Position 7.62mm Terminal Block for MX10.  

ZIMO Terminal Block - 2 Position 5.08mm MXULFAReplacement 2 Position 5.08mm Terminal Block for MXULFA.  

ZIMO Terminal Block - 2 Position 5.08mmReplacement 2 Position 5.08mm Terminal Block for MX10.  

ZIMO Terminal Block - 2 Position 3.5mmReplacement 2 Position 3.5mm Terminal Block for MX10, MXULFA or MXTAP.  

ZIMO STARTGFU MX10 DCC Command Station with MX33FU Wireless Handheld and 600W Power SupplyPackage Contents:ZIMO MX10 DCC Command StationZIMO NG600 Power Supply - 600W 30V 20A IP65 CV+CCZIMO MX33FU...

ZIMO START MX10 DCC Command Station with MX33 Handheld and 240W Power SupplyPackage Contents:ZIMO MX10 DCC Command StationZIMO NG600 Power Supply - 600W 30V 20A IP65 CV+CCZIMO MX33 Tethered Cab DCC...

ZIMO START MX10 DCC Command Station with MX33 Handheld and 240W Power SupplyPackage Contents:ZIMO MX10 DCC Command StationZIMO NG200 Power Supply - 240W 30V 8A IP65 CV+CCZIMO MX33FU Wireless Cab DCC...

ZIMO START MX10 DCC Command Station with MX33 Handheld and 240W Power SupplyPackage Contents:ZIMO MX10 DCC Command StationZIMO NG200 Power Supply - 240W 30V 8A IP65 CV+CCZIMO MX33 Tethered Cab DCC...

ZIMO 8-pin NMRA (NEM652) Male ConnectorThis is a 8-pin (2x4) male header on 2,54 mm pin spacing to make a ZIMO R - Type decoder from a normal hardwired decoder, e.g. convert a MX630 to a MX630R.This...

ZIMO NEM658 PluX22 22-pin Male ConnectorThis is a 22-pin (2x11) male header on 1,27 mm pin spacing to make a wired ZIMO P22 - Type decoder from a normal hardwired decoder, e.g. convert a MX630 to a...

ZIMO NEM658 PluX16 16-pin Male Connector This is a 16-pin (2x8) male header on 1,27 mm pin spacing to make a wired ZIMO P16 - Type decoder from a normal hardwired decoder, e.g. convert a MX630 to a...

ZIMO NG600 Power Supply - 600W 30V 20A IP65 CV+CC The ZIMO NG600 Power Supply is a high-performance dustproof and waterproof AC-to-DC power supply providing up to 600W of power.  The...

ZIMO NG200 Power Supply - 240W 30V 8A IP65 CV+CC The ZIMO NG200 Power Supply is a high-performance dustproof and waterproof AC-to-DC power supply providing up to 240W of power.   The...

ZIMO MXULFA Decoder Update Module PC USB CableNew generic USB 2.0 Cable, 1A Male Type A to Mini 5-Pin Type B SPECIFICATIONS: 100% Brand New and High Quality Color: Black Length:50cm Transfer...

ZIMO MXULFA Decoder Update Module Power Supply - 16V 4.5AFEATURES: Overvoltage and Shortcircuit protection. Short Circuit Protection. Over Temperature Protection. Wide input Voltage range,could...

Zimo MXULF-A DCC Decoder Update Module with LCD DisplayThe MXULFA are more than a simple decoder update and programming tool.  It is designed to function as a small digital system. Loading...

ZIMO MXTAPS DCC Decoder Test and Connector Board - Small ScaleThe ZIMO MXTAP Decoder Test and Connector Boards are the perfect accessory for use with the MXULFA, MX10, and other ZIMO products for...

MX9 HLU boards

MX9 ACA boards

ZIMO Elektronik... World Class Servo Control... Exceptional Value... ZIMO servo decoders are used to operate and generate feedback from servo motors for controlling turnouts, crossing gates,...

ZIMO Elektronik... World Class Servo Control... Exceptional Value... ZIMO servo decoders are used to operate and generate feedback from servo motors for controlling turnouts, crossing gates,...

ZIMO Elektronik... World Class Turnout Control... Exceptional Value... ZIMO accessory decoders are used to operate and generate feedback from turnouts, light and semaphore signals, magnetic...

ZIMO Elektronik... World Class Turnout Control... Exceptional Value... ZIMO accessory decoders are used to operate and generate feedback from turnouts, light and semaphore signals, magnetic...

ZIMO Elektronik... World Class Turnout Control... Exceptional Value... ZIMO accessory decoders are used to operate and generate feedback from turnouts, light and semaphore signals, magnetic...

ZIMO Elektronik... World Class Turnout Control... Exceptional Value... ZIMO accessory decoders are used to operate and generate feedback from turnouts, light and semaphore signals, magnetic...

ZIMO Elektronik... World Class Turnout Control... Exceptional Value... ZIMO accessory decoders are used to operate and generate feedback from turnouts, light and semaphore signals, magnetic...

ZIMO Elektronik... World Class Turnout Control... Exceptional Value... ZIMO accessory decoders are used to operate and generate feedback from turnouts, light and semaphore signals, magnetic...

ZIMO MX10 - MX10EC Replacement AntennaReplacement Antenna for MX10 or MX10EC. 13mm DIA x 20cm Long  5dBi 50 ohm

ZIMO MX10 DCC Command StationThe MX10 is the central unit or "Command Station" of the digital control system from ZIMO.The ZIMO Command Station features modern technology and compact design.At first...

ZIMO MSTAPG DCC Decoder Test and Connector Board - Large ScaleThe ZIMO MSTAPG Decoder Test and Connector Boards are the perfect accessory for use with the MXULFA, MX10, and other ZIMO products for...

ZIMO Gold Capacitor - MGOGURT Micro Electrolytic Super Cap Collection - 20x 0.3F / 2.7V   Miniature gold caps ( 0.3 F ) for MS580N18 decoders as an extension of the internal energy storage to...

ZIMO M4000Z Logic Level Function Amplifier   Most ZIMO decoders feature "normal" function outputs and so-called logic level outputs that can be switched between 0 V (for "off") and 5 V (for...

ZIMO 22AWG Decoder Wire - 7m 7 m (22.9ft) stranded wire in choice of colors ( black, red, gray, orange, blue, white, yellow, green, brown, violet) This heavy gauge wire is...

ZIMO 22AWG Decoder Wire - 7m 7 m (22.9ft) stranded wire in choice of colors ( black, red, gray, orange, blue, white, yellow, green, brown, violet) This heavy gauge wire is...

ZIMO 22AWG Decoder Wire - 7m 7 m (22.9ft) stranded wire in choice of colors ( black, red, gray, orange, blue, white, yellow, green, brown, violet) This heavy gauge wire is...

ZIMO KOSL3 LED Controller - 2-8mA Constant Current Source     2 bars of 10 constant current sources for LEDs each, bendable.   For constantly bright LEDs when using an energy store on...

ZIMO KOSL2 LED Controller - 0.5-4mA Constant Current Source     2 bars of 10 constant current sources for LEDs each, bendable.   For constantly bright LEDs when using an energy store...

ZIMO KOSL1 LED Controller - 0.2-1mA Constant Current Source     2 bars of 10 constant current sources for LEDs each, bendable.   For constantly bright LEDs when using an energy store...

The ZIMO StEin Stationary Equipment Module   "Stone" - modules ( St ationär- A directional modules) are of which are intended to be used together with a base unit of the ZIMO MX10 series...

The ZIMO StEin Stationary Equipment Module   "Stone" - modules ( St ationär- A directional modules) are of which are intended to be used together with a base unit of the ZIMO MX10 series...

ZIMO Gold Capacitor - GOLDSORG Mini Electrolytic Super Cap Collection - 20x 1F / 2.7V   Goldcaps (1 F) for self-assembly of goldcap modules, consisting of 6 or 7 goldcaps connected in series as...

ZIMO Capacitor - ELKSOMT Electrolytic Cap Collection For 10 - 20 Zimo decoders WITH 25 V - energy storage port (= integrated energy storage circuit) including MX631, MX632, ..., MX644, ..., several...

ZIMO Capacitor - ELKSOGR Electrolytic Cap Collection   For 5 - 10 Zimo Large Scale decoders WITH 16 V - energy storage port (= integrated energy storage circuit) including MX695,...

ZIMO NEM651 6-pin Female Connector   This is a 6-pin female header on 1,27 mm pin spacing.  This is the mating connector for a ZIMO F - Type decoder, e.g. MX621F, MX630F, and can be...

ZIMO NEM658 PluX22 - NEM660 21MTC 22-pin Female Connector   This is a 22-pin (2x11) female header on 1,27 mm pin spacing to make a wired ZIMO C or D - Type 21MTC decoder from a normal...

ZIMO CAN BUS Ready Made Cable - CAN2.0 BUS To XNet Adapter Cable - 1m Long   ZIMO CAN BUS Ready Made Cables And Cable MaterialCAN2.0 BUS Adapter Cable (= remote cable) 1m for connecting MX32,...